Language :  

FAQ
Home  >>   Mobile Car Digital Video Recorder
Mobile Car Digital Video Recorder

Mobile Car Digital Video Recorder

Model:ST-M4R-S

VGA Switch the output mode to VGA (Include: VGA1, VGA2, VGA3)
VIDEO Switch back from VGA to composite output (V1)
SETUP System setting screen (may require login)
Stop Used to stop the recording manually.
Record Used to start the recording manually.

 

 

  • Product Detail
  • Product parameters
  • Related Products
 

1. PRODUCT OVERVIEW

    ST-M4R-S is a cost-effective and functional Mobile Digital Video Recorder specially designed for vehicle surveillance and local recording, combined with high-speed processor and embedded operating system. The advanced H.264 video compression and decompression .

2. VIDEO AND AUDIO MDVR FERATURES AND CAPABILITIES

·channels for video input, 4CH D1 at 12fps/15fps continuous or priority video recording and live view display.

·Semi-transparent GUI makes setting for GUI and live display synchronously.

·Special file system NVRFSTM is very good for improving the security level of data, providing self-recovery  

 

3. Function

Self-check, self-backup for certain critical data and avoiding data fragment that affect system efficiency.

·Flexible Mirror recording provide at least 2-3 hours back-up recording evidence (in case fail occur in HDD).

·Better Compression rate at H.264 (50% less than MPEG4).Enhance recording storage rate in most efficiency way.

·4 channels for high-fidelity, digitally recorded, synchronized audio matched to 4 video channels

·Continuous recording while in the playback mode.

·User friendly criteria to playback the events associated video only.

·Automatic timer to resume the live display if the unit is idle for user defined timings.

·User-selectable settings for quality and audio record enable/disable for each video channel.

·12v power supply for multiple devices such as cameras, sensors, relays and any other accessories.

·Selectable frame rate with event-triggered burst recording speeds up to 30FPS/camera.

·Multiple alarm inputs with selectable pre-alarm and post-alarm record timings.

 

 

4. REMOTE CONNECTION CAPABILITIES

·Handheld Infra-Red controller with OSD for quick access to recorded video and settings menu.

·PC-Based Client software for live viewing, playback video, playback events associated video, and download

  Capabilities.

 

5. HANDHELD IR CONTROL KEY FUNCTIONS:

a.    NUMERIC KEYPAD:

 

[0-9] keys: During setup, number keys are used to input values.

For viewing channels 1, 2, 3 and 4 use 1, 2, 3 and 4 on numeric keypad respectively.

 

[+], [-] keys: During setup, plus and minus are used to select next or previous values.

During real time view of individual camera, after you pressed        key use plus and

minus to make the color adjustments. Pressing       will navigate through the color

adjustment options. Please be advised that the unit needs to stop recording before any color

adjustments are made.

 

b.    SETUP MENU NAVIGATION:

 

▲, ▼: Up, down directional keys: Moves selection up and down in setup menu.

►, ◄: Left, Right directional keys: Moves cursor left or right in setup menu.

[ENTER] key: During setup, select and save entry

             During Playback, display all the information that setup by OSD overlay

             Menu.

 

c.    OTHER KEYS FUNCITONS:

 

LOGIN/ LOCK

If the security is enabled in the setup, use LOGIN / LOCK or SETUP

key to enter the user setup. It is important to remember the

password due to without restoration function.

POWER

The Power button can reset the MDVR in to sleep mode (unit will

stop recording while in the sleep mode)

VGA

Switch the output mode to VGA (Include: VGA1, VGA2, VGA3)

VIDEO

Switch back from VGA to composite output (V1)

 

Swapping between multi-channel and single channel monitor

While in surveillance screen only. Press this button to change the

number of display channels. By pressing the key, display channel

change in the sequence of four→ one→ two→ three→ four→one

(recycle)

 

Brightness, contrast, color adjustment per channel. Use [+] [-] button

to change the values. User can adjust the values for each channel

individually.

SETUP

System setting screen (may require login)

EXIT

Returns to the previous menu. Pressing exit key takes one step back

in the until the live monitor screen is displayed

Stop

Used to stop the recording manually.

Record

Used to start the recording manually.

PAUSE/STEP

         ▐►

Freezes playback to a single frame and can advance one frame at a

time. To advance the frame press Pause / Step to move frame by

frame. Press EXIT to return to normal playback speed

PLAY     ►

Starts/Resumes playback from any other mode (FF, RR, Frame by

Frame etc)

SLOW  

Reduces playback speed to 1/2, 1/4, 1/8 modes. Press PLAY to

return to normal playback speed

GOTO 

Quick search mode within the file playing back. Select the desired

file and start to play. Press GOTO button and input the desired time.

Select START to jump to the specific time

NEXT 

Increase volume while playback (if audio is recorded) or multimedia

playback

PREV  

Decrease volume while playback (if audio is recorded) or multimedia

playback

REW   

Rewinds the video while playback. X2 and X 4 modes available

FWD   

Fast forward the video while playback. X2 and X4 modes available

CF

No use at present

[F1], [F2],[F3],[F4]

Reserved for future use

 

 

  1. d.    PAN/TILT/ZOOM FUNCTIONS

 

    While connect with PTZ camera and using the RS232C in DB25, following command can control with

PTZ camera with following function:

 

[ZOOM IN +], [ZOOM OUT -]

ZOOM IN/OUT

[IRIS +], [IRIS-]

IRIS control

[FOCUS +], [FOCUS -]

FOCUS IN/OUT

PTZ

Start to active the PTZ function

AUTO

Auto run with the PTZ pattern

PRESET

Preset default position

RECALL

Recall the set program

BRUSH

Brush the glass screen

 
SUNTOR : wireless transmitter | wireless AV transmitter | CCTV camera  | wireless bridgewireless transceiver wireless video transmitterEspañol

© 2006-2014 SUNTOR All Rights Reserved.     0086-13760341552      0086-755-8291 4473      E-mail:suntor-08@0086cctv.com   
SUNTOR ELECTRONICS CO.,LIMITED   3F/A17 Building Guigu Power Qinghuyuan ,Longhua Town , Baoan District ,Shenzhen City ,China